Picnic table

By Drean

Source: http://www.instructables.com/id/picnic-table-1/

Picture of picnic table
This instructable is for a large diy wooden picnic table  which is easy to step in.
The picnic table in the construction pictures is one without the corners under 45 degrees like in the first picture.
It is made completely of two by fours (89×38)

Step 1: The two benches

Picture of the two benches
PICT0017.JPG
PICT0023.JPG
totaal.jpg
I used some m8 threaded rods to connect the leg constructions.
In total is have used 24 each 16 cm and have cut them when the table was ready.
Some coach bolt will even look better.
For the other connections i used wood screws of 80mm.

Step 2: The table

Picture of the table
PICT0015.JPG
PICT0013.JPG
For the legs of the table you need to cut out a piece for each leg.

Step 3: Screw it all together

Picture of screw it all together
PICT0024.JPG
The legs of the table must not be lower than the connection two by fours .
The horizontal connections are 50mm of the floor so it won’t wobble on an uneven surface.

Step 4: In inches

Picture of in inches
2.jpg
3.1.jpg

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s